added new command to test setting threholds from the command line

hit2023v2_RMS/dev_commands.h

@@ -110,6 +110,10 @@
 	//D:[]											D: [(Readout of 5 ADC channels as 32-bit integers)]
 	//Slow control snapshot - read all channels of ADC
 
+#define COMMAND_SET_CLUSTER_THRESHOLD 0x4001
+    //L: ?
+    //D: []
+    //Send 8 bit beam cluster selection threshold
 
 // ***DATA TRANSFER - SOCKET 1!!!!***
 

hit2023v2_RMS/device.cpp

@@ -109,6 +109,7 @@ void Device::configure(DeviceConfig &cfg)
         ctrlSetMasterDelay(deviceConfig.master_delay);
         ctrlSetSlaveDelay(deviceConfig.slave_delay);
         ctrlSetGain(deviceConfig.gain);
+        ctrlSetClusterThreshold(deviceConfig.threshold);
         ctrlConfigBunch(deviceConfig.dma_bunch, deviceConfig.eth_bunch);
         ctrlConfigPeer(ipshort, DEV_BASE_DATA_PORT+ deviceConfig.device_id);
     }
@@ -480,3 +481,17 @@ int Device::ctrlConfigBunch(int dma, int eth)
     else
         return queryCtrl(COMMAND_DAQ_DISABLE, txdata, rxdata);*/
 }
+
+int Device::ctrlSetClusterThreshold(int threshold)
+{
+    QVector<unsigned short> rxdata;
+    QVector<unsigned short> txdata;
+    txdata.append((unsigned short)threshold);
+
+    if (threshold)
+        return queryCtrl(COMMAND_SET_CLUSTER_THRESHOLD, txdata, rxdata);
+    else
+        return queryCtrl(COMMAND_SET_CLUSTER_THRESHOLD, txdata, rxdata);
+}
+
+}

hit2023v2_RMS/device.h

@@ -34,7 +34,9 @@ public:
     int gain;               //0 (low) or 1 (high); TO BE DONE
     int dma_bunch;
     int eth_bunch;
+    int threshold;
     int max_sensors()
+
     {
         switch(hardware_ver)
         {
@@ -47,7 +49,7 @@ public:
     int nr_channels() {return 64*nr_sensors;}
     DeviceConfig() : own_ip{10,0,7,1}, device_ip{10,0,7,2},
         device_id{0}, hardware_ver{0}, master{1}, plane{0}, position{0}, nr_sensors{0},
-        period{65535}, tint{1}, master_delay{1}, slave_delay{1}, gain{0}, dma_bunch{1}, eth_bunch{1} {}
+        period{65535}, tint{1}, master_delay{1}, slave_delay{1}, gain{0}, dma_bunch{1}, eth_bunch{1}, threshold{10} {}
 
 };
 
@@ -100,6 +102,7 @@ protected:
     int ctrlConfigBunch(int dma, int eth);
     int ctrlSetMasterDelay(int tint);
     int ctrlSetSlaveDelay(int tint);
+    int ctrlSetClusterThreshold(int threshold);
 protected slots:
     void onConnected();
     void onSocketError(QAbstractSocket::SocketError socketError);

hit2023v2_RMS/dialogdevices.cpp

@@ -28,7 +28,7 @@ void DialogDevices::showEvent(QShowEvent * event)
 
             ui->spinNrDevices->setValue(deviceSettings->value("NrDevices", int(1)).toInt());
 
-            ui->tableDevices->setColumnCount(8);
+            ui->tableDevices->setColumnCount(9);
             QStringList h_header;
             h_header.append("IP Address");
             h_header.append("Hardware ver.");
@@ -38,6 +38,7 @@ void DialogDevices::showEvent(QShowEvent * event)
             h_header.append("Master");
             h_header.append("Master dly");
             h_header.append("Slave dly");
+            h_header.append("Threshold");
             ui->tableDevices->setHorizontalHeaderLabels(h_header);
 
             importSettings();
@@ -89,6 +90,8 @@ void DialogDevices::importSettings()
             ui->tableDevices->setItem(dev_nr, 6, newItem );
             newItem = new QTableWidgetItem(deviceSettings->value("SlaveDelay","1").toString());
             ui->tableDevices->setItem(dev_nr, 7, newItem );
+            newItem = new QTableWidgetItem(deviceSettings->value("ClusThresh","10").toString());
+            ui->tableDevices->setItem(dev_nr, 8, newItem );
         }
     }
 
@@ -201,6 +204,20 @@ int DialogDevices::validateAndSave()
         if (generated.compare(user_data) != 0)
             data_ok = 0;
         ui->tableDevices->item(dev_nr,7)->setText(generated);
+
+        //now cluster threshold
+        user_data = ui->tableDevices->item(dev_nr,8)->text();
+        num_value = user_data.toInt();
+        if (num_value < 1)
+            num_value = 1;
+        if (num_value > 255)
+            num_value = 255;
+        generated = QString("%1").arg(num_value);
+            //if the strings are identical, save the value and return 1
+        if (generated.compare(user_data) != 0)
+            data_ok = 0;
+        ui->tableDevices->item(dev_nr,8)->setText(generated);
+
     }
 
         //now store the data
@@ -225,6 +242,9 @@ int DialogDevices::validateAndSave()
         deviceSettings->setValue("Master", ui->tableDevices->item(dev_nr,5)->text());
         deviceSettings->setValue("MasterDelay", ui->tableDevices->item(dev_nr,6)->text());
         deviceSettings->setValue("SlaveDelay", ui->tableDevices->item(dev_nr,7)->text());
+        deviceSettings->setValue("Threshold", ui->tableDevices->item(dev_nr,8)->text());
+
+
 }
 
     return 1;